Application Configuration Files

The file folder icon on the right side of the application tool bar opens a menu of file operations for managing configurations.

Resets your current 5G NR configuration to default settings.

Opens a file management window where you can open a previously saved 5G NR configuration file (*.pwsg).

SCPI Command	[:SOURce]:RADio:NR5G:MEMory:STATe:RECall <string>
SCPI Example	RAD:NR5G:MEM:STAT:RECall "c:\temp\nr5g.pwsg"
Note	If input file does not exist, error "File not found" is generated. If input parameter is only file name without directory information, default data directory is used: <Documents>\Keysight\PathWave\SignalGenerator\Apps
State Saved	No
Initial S/W Revision	A.11.00

Opens a file management window where you can save your current 5G NR configuration as a file (*.pwsg) for future use.

SCPI Command	[:SOURce]:RADio:NR5G:MEMory:STATe:SAVE <filename>
SCPI Example	RAD:NR5G:MEM:STAT:SAVE "c:\temp\nr5g.pwsg"
Note	If input parameter is only file name without directory information, it is saved in the default data directory: <Documents>\Keysight\PathWave\SignalGenerator\Apps
State Saved	No
Initial S/W Revision	A.11.00

Opens a file management window where you can save your generated waveform file (*.wfm) for future use.

SCPI Command	[:SOURce]:RADio:NR5G:WAVeform:EXPort <filename>
SCPI Example	RAD:NR5G:WAV:EXP "c:\temp\nr5g.wfm"
Note	It is an overlap SCPI. If input parameter is only file name without directory information, it is saved in the default data directory: <Documents>\Keysight\PathWave\SignalGenerator\Apps
State Saved	No
Initial S/W Revision	A.11.00

Opens a file management window where you can open a previously saved setup file (.scp) to the waveform configuration.

For more information, including SCPI, see Import Signal Setup.

Opens a file management window where you can save the current waveform configuration as a setup file (.scp) for future use.

For more information, including SCPI, see Export Signal Setup.